Band Size (Width x Length)(cm): 2x about 17 (circumference of round - elastic), Current Limiting Resistor Value: 1Mohm (+/-5%), Ground Wire Length (m): (Practical use) about 1.5, Band Width (mm): 20, Weight (g): 30
Caution: Mouse cap sold separately., Power Cord: Three core rubber cord, Trowel Mass (g): (Cord) 46, Overall Length of Trowel Part (mm): (Cord) 217, Cord of Trowel Part (m): 1.2, Trowel Leakage Voltage: Less than 2mV, Trowel Part Consumption Power: 65W(26V), Station Output: 26V, Resistance between Iron Tip Ground(ohm): 2 or less, Station mass (kg): About 1.2 (cord), Station External Dimensions (mm): 100(W)x120(H)x120(D), Standard Iron Tip: T18-B, Plug: Two-pole grounding type plug, Power Consumption (W): 70, Power (V): AC100 50/60Hz
Soldering, ESD Protection Products > Solder Supplies > Soldering Irons > Electric Type
Purpose: Replacement soldering bit of SKZ-01, 03 lead free solder station soldering iron., Replacement soldering bit of SKZ-01, 03 lead free solder station soldering iron., 2015 Trusco Published Pages: 1 2264, 2014 TRUSCO Published Page: 1-2268
Soldering, ESD Protection Products > Solder Supplies > Soldering Irons > Soldering Iron Parts > Soldering Iron Replacement Tips
Caution: Please note that pins may not be removable depending on the situation. Please do not use pins with sizes that don't fit.Pins may get damaged., Please note that pins may not be removable depending on the situation. Please do not use pins with sizes that don't fit.Pins may get damaged., 2015 Trusco Published Pages: 1 2329, Dimensions C (mm): 21, 21, Dimensions B (mm): 64, 64, Surface Processing: Nickel plating, Nickel plating, Dimensions A (mm): 12, 12, Material: SUS303G/C3604, SUS303G/C3604
Soldering, ESD Protection Products > Peripheral Products for Circuit Board > Peripheral Tools for Circuit Board > Drawing tool
AS ONE Part Number: 1-6404-01, Adsorption Capacity (gf): 120 (phi10 pad is used), Battery Life: 30000 (alkaline battery), Power: Two AAA type batteries, Outside Dimension (mm): W130xH29xD22, Weight (g): (Excluding battery) 43, TRUSCO Part Number: 256-0445, TGK Product Number: 000-25-27-01, Accessories: (A1312, A1311), 2 Alkaline batteries (A1165), 2 kinds of pad vent nozzle, storage case
Purpose: Electronic part assembly work bench The work bench where static electricity measure is not done, Electronic part assembly work bench The work bench where static electricity measure is not done, 2015 Trusco Published Pages: 1 2371, Snap Diameter (mm): (For grounding) 10, Thickness (mm): 2, 2
Caution: Please make sure that the conductor ribbon is in direct contact with the skin during use. Also, always check with dedicated testers before using., Please make sure that the conductor ribbon is in direct contact with the skin during use. Also, always check with dedicated testers before using., Purpose: Static electricity countermeasure, Static electricity countermeasure
Operating Temperature (degree C): 0 - 40, Polar Display: Polarity +, - polarity display, Measurement Potential Range: Normal mode / 10V - 19.99kV IB mode / 1V - 1999V, Detection Method: (Signal) vibrating chopper, Measuring Distance Adjustment: (The focal point of the light mark distance 30mm) red LED light focused, Measuring Distance (mm): (Detector between the object to be measured) 30, Body Dimensions (Width x Depth x Height) (mm): 68x22x138, Mode Switching: Switch in the MODE button, Display Part: Backlight built-in LCD display, Angle (Degree): (Hold for each 45 degree) (head rotation angle) 180, Power (V): DC9 (alkaline corner type batteries), Weight (g): (Including battery) 230, Specification: Data update frequency / 1 time per 0.5 sec Battery check / Level indicated on display uni...
Purpose: Storage, classification of electronic part and movement etc inside work section, Storage, classification of electronic part and movement etc inside work section, Outer Dimensions (Width W x Height H x Depth D) (mm): 192x25x256, Weight (g): 85
Class: 100 to 1000, Dimension (mm): 250x250, Material: Rayon 80% and polyester 20%, TRUSCO Part Number: 518-6846, TGK Product Number: 153-55-84-32, Application: IC, LCD, ceramic, light-emitting diodes, magnetic disk, and magnetic tape
Catch-Phrase: Temperature control is a handy and easy! It is convenient to carry., Operating Environment: Applied rated degree of contamination 2 (based on IEC/UL 61010-1), Measuring Temperature Range (degree C): 0 - 700, Tolerance: +/-3 deg C (range of 300-600 deg C), Operating Envrionment: 0-40 deg C, 20-90%RH no condensation., Functions: Auto shaft-off function, a max hold function, Outer Dimensions (Width W x Height H x Depth D) (mm): 68x140x38 (without protruding parts), Resolution (deg C): 1, Sensor: K (CA) thermocouple, Display: Battery alarm, burnout, max hold, Power: 006P 9V battery, Weight (g): 115 (without battery), Set Contents: Main part, battery (006P 9V manganese), operation manual, sensor x10 (191-212)
Soldering, ESD Protection Products > Solder Supplies > Measuring Instrument > Soldering Iron Tip Thermometers
AS ONE Part Number: 9-5620-01, Material (Pat): Silicone rubber (carbon containing), Weight (g): 15, Material: ABS (CONTAINING CARBON), Set Contents: 3 Pat (S:pad diameter: 3.5 mm phi / 4 g capability ,M: pad diameter 6.5 mm phi- 50 g adsorption capacity , L: pad diameter: 9.5 mmphi-130 g adsorption capacity and ), nozzle (straight-high angle), Description 2: Compressed air chamber at your fingertips,take away from the smoke and is pressed against the target compound., TRUSCO Part Number: 166-0292
Caution: Please wash well before use (because it contains trace amounts of wetting agent)., Purpose: Wiping of electronics, optics, pharmaceutical manufacturing equipment, and work benches, etc. Clean room cleaning., Heat-Resistant Temperature (deg C): 60 deg C or less, Type: Dry, Dimension (mm): 230x230x2, Material: PVFM (polyvinyl formal)
Caution: Installs powerful conductive tape. Prevents the removal of fibers through a unique fixing process
You can cut easily. However, fibers may protrude near the cut)
Light weight. Even attached on long stay, warp is slight.
It's ability to remove static is , Purpose: Many purposes, Hole Pitch (mm): 150, Unit Dimensions Length (mm): 300, Electrode Dimension (mm): Length/10
Heat-Resistant Temperature (deg C): 1000, Overall Length (mm): 30.0, Material: Ceramic, Caution: Tip is formed precision. Do not apply shock nor ply. Do not put into water when it is hot., Application: For work related to electronic components, semiconductors, bio-superconductivity.
Purpose: Spare solder of lead wire., Unit Dimensions (Width x Depth x Height)(mm): 90x150x89, Melting Solder Amount (kg): 0.3, Control Temperature (degree C): 270 - 530, Power Cord: 1.3m, Tank Dimension (mm): Width depth 34x 34x 32 Height, Power Consumption (W): 130, Power (V): AC100, Weight (g): 800
Soldering, ESD Protection Products > Solder Supplies > Solder Pot