Buy more than* S$200* and get FREE SHIPPING

Cutting Tool, Grinding Tool and Measurement Tool

Sort by:
Showing 1 - 60 of 26,012 Results
Show: 30 60 90
VIEW: Grid View List View
Digital Multimeter
Sanwa Electric Instrument
41.79 SGD
ADD TO CART
Duty Ratio: 0.1 - 99%, Trunking: Buzzer sounds at 10ohm - 120ohm Open-circuit voltage : 0.4V, Diode Test: Open voltage about 1.5V, DC Voltage (V): 400m/4/40/400/500, Resistance (omega): 400/4k/40k/400k/4M/40M, AC Voltage (V): 4/40/400/500, Dimensions (Height H x Width W x Depth D) (mm): 108x56x11.5, Condenser Capacity (microF): n/50n/500n/5micro/50micro/200microF, Power: Coin type lithium battery CR2032(3V)x1, Cycle(Hz): 9.999/99.99/999.9/9.999k/60.00kHz, Weight (g): 85 (Body only), Type: Digital multimeter, TRUSCO Part Number: 284-8546, Accessories: Notebook type case Coin cell battery
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Electrical Measuring Device, Tester Etc.
Absolute Digimatic Calipers
Mitutoyo
399.90 SGD
Sum Roller: Available, External Output Terminal: Available, Battery Life: About 3.5 years (continuation 20000 hours), Maximum Response Speed: No limit, Repeat Pricision (mm): 0.01, Quantization Error: +/-1 count is not included., Minimum Displayed Amount (mm): 0.01, Power: SR44(button type silver oxide cell)x1, Specification: ABS (absolute) measurement function INC(incremental) measurement function Scale dirt detection function Battery voltage drop warning External output function (by using the separately sold connector cable, it can output the measurement data.) Hold function (by using the optional hold unit, displayed values can be made to “hold” (maintain).Cannot be combined with output function.)
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Vernier Caliper, Micrometer and Dial Indicator
Digital Microscope, USB
Kenko
95.27 SGD
ADD TO CART
Caution: PC is not included, PC is not included, Interface: USB2.0, Sensor: Image sensor / About350000 megapixel CMOS, Dimensions (Width W x Depth D x Height H) (mm): 112x134x220, OS Support: Windows 7/XP(SP2)/Vista(32bit)/7(32bit), Magnification: OticaI/ 50-100 magnifitications / 100- 200magnifitications, 200 - 400 magnifitications, Power: Microscope / AA alkaline battery 3pieces (LED light source) Digital viewer / from PC(USB connection), Weight (g): Microscope / about 320(accessories not included) Digital viewer / about 67, Accessories: Tweezers, syringe, slide glass, CD-ROM, instruction manual
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Optical Measuring Instrument, Loupe, Magnifying Glass, Microscope and Telescope
Tap And Die Set
MonotaRO
60.81 SGD
Material: SKS, Type: Mid-tap
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Tap, Dies
Stopwatch
Casio Computer
4.71(7)
29.02 SGD
ADD TO CART
Time Accuracy (%): 99.997685, Battery Life: About 3 years, Batteries: CR-2025 (attachment for monitor), Dimensions (Height H x Width W x Depth D) (mm): 62x63.5x17, Weight (g): 40.3, Color: Black, Material: Resin, Specification: 1/100 second measurement, 10 hour meters (normal measurement, addition measurement, lap split measurement and 1.2 rank simultaneous measurement)
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Other Measuring Instruments
Antistatic Wrist Strap
MonotaRO
5.12 SGD
ADD TO CART
Band Size (Width x Length)(cm): 2x about 17 (circumference of round - elastic), Current Limiting Resistor Value: 1Mohm (+/-5%), Ground Wire Length (m): (Practical use) about 1.5, Band Width (mm): 20, Weight (g): 30
Category Cutting Tool, Grinding Tool and Measurement Tool > Solder Products and Electrostatic Discharge Articles > Straps
Sharpening Stone
NANIWA
26.20 SGD
ADD TO CART
Material (Unit): ABS Resin, ABS resin, Grinding Stone Size (mm): 175x55x25, 175x55x25, Type: for medium grindstone, finishing grindstone, Weight (g): 595, 595, Abrasive Material: fused alumina, Fused alumina, Grain Size: #1000/#3000, # 1000 - # 3000
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding
Replacement Filter
Hakko
4.00(4)
17.43 - 29.15 SGD
Specification: Charcoal granules filter
Category Cutting Tool, Grinding Tool and Measurement Tool > Solder Products and Electrostatic Discharge Articles > Solder and Flux
General Purpose Pressure Gauge
Daiichi Keiki Seisakusho
37.74 - 54.19 SGD
Outer Diameter (phi mm): 100, Joint Size: G3/8B (PF)
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Dynamometer, Load Cell, Torque, Pressure and Flowmeter
King finishing abrasive
King Stone
5.00(7)
53.79 SGD
ADD TO CART
Purpose: For superfinishing of inner cutlery and stainless steel cutlery.For cooking knife, knives, carving knives, planes, chisels, scissors, electric Planer knives, and other precision blades., For superfinishing of inner cutlery and stainless steel cutlery.For cooking knife, knives, carving knives, planes, chisels, scissors, electric Planer knives, and other precision blades., TKG Part Number (2015): 5-0289-2701, Dimension (mm): 210x73x22, 210x73x22, Grain Size: 6000, 6000, Material: Special abrasive materials, Accessories: exclusive use stand, Exclusive stand
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding
Neodymium Magnet
Magna
3.00(1)
78.90 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Magnetic Tool
M-Standard Calipers, Vernier Caliper
Mitutoyo
60.06 - 1,179.90 SGD
Minimum Scale (mm): 0.05, Series: 530
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Vernier Caliper, Micrometer and Dial Indicator
Laser Distance Meter
BOSCH
4.67(6)
279.90 SGD
ADD TO CART
Measurement Pricision (mm): Distance measurement: +/- 1.5 standard measuring time / inclination measurement: +/- 0.2 degree (retouched) tilt angle deviations up to 45 degree +/- increase or decrease 0.01 degree.Deviation increases or decreases depending on the measuring environment., Storage Temperature Range (degree c): -20 - +50, Dust-proof Water-proof: IP54 (except battery compartment), Lazer Dot Diameter (phi mm) [Distance (m)]: (For measuring 10 m distance, 25 degree c ambient temperature) About 6, Measuring Range (m): Distance measurement: 0.05 to 80 / Pythagorean measurement slope:-60 to + 60 degree / tilt measurement: 0-360 degree, Measuring Unit: Distance measurement :0.1mm/ inclination measurement: 0.1 degree, Wavelength (nm): 635, Mounting Screw Hole Size: 1/4 inch [6.35 mm] (fo...
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Range Finder / Scale, Square, Measuring Tape and Scale
Sharpening Stone,  "King Deluxe"
King Stone
28.05 - 33.42 SGD
Purpose: Rough sharpening (300 grain) for: planes, chisel and variety of knives Fot medium finishing (800 to 1,200 granularity) : for stainless steel knife, flick knife planers, chisels, kitchen knives, scissors, knives, and other precision blades, Rough sharpening (300 grain) for: planes, chisel and variety of knives Fot medium finishing (800 to 1,200 granularity) : for stainless steel knife, flick knife planers, chisels, kitchen knives, scissors, knives, and other precision blades, Material: special abrasive, Special abrasive materials
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding
Digital Vibration Meter
Showa Sokki
5.00(1)
1,189.90 SGD
ADD TO CART
Purpose: Vibration measurement for blowers used in automotive coating after drying. Vibration measurement of large-sized computer. To determine the electromagnetic valve actuation condition. Defect inspection of machine tools. General purpose engine m, Vibration measurement for blowers used in automotive coating after drying. Vibration measurement of large-sized computer. To determine the electromagnetic valve actuation condition. Defect inspection of machine tools. General purpose engine m, Battery Life (continuous use): 30 hours or more, Frequency Range (Hz): Acceleration: 5 to 5000 (+/- 1 dB), 5-10,000 (+/-3 dB) Speed: 10 to 1000 (based upon rated JIS B 0907 in relation with measuring instruments vibrating severely) Displacement: 10 to 1000 (1 dB), Detector: MODEL-2304A, Dimensions ...
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Other Measuring Instruments
Precise Level
Obishi Keiki Seisakusho
5.00(1)
209.90 - 359.90 SGD
Purpose: Machine investigation, assembly, built in machine., Machine investigation, assembly, built in machine.
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Goniometer and Spirit Level, Level and Survey
Welding Gauge
Niigata Seiki
5.00(1)
89.23 SGD
ADD TO CART
Undercut Measuring Range (mm): 25, Pricision: Length accuracy +/-1 Angular accuracy +/-2degree, Dimension (mm): 95x68, Thickness (mm): 1.5, Material: Stainless steel (SUS420J2), Type: Welding gauge
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Reference Instrument and Gauge
Anti Static Mat
AS ONE
4.00(1)
79.48 - 129.90 SGD
Surface Resistance Value (ohm): Diffusion layer / 5 x 10 7 - 10 9 , conductive layer / 5 x 10 3 - 10 4 , Tensile Strength: 140kg/cm, Thickness (mm): 2, Material: NBR (nitrile rubber)
Category Cutting Tool, Grinding Tool and Measurement Tool > Solder Products and Electrostatic Discharge Articles > AS ONE Products
Rubber Plastic Hardness Tester Standard
KORI SEIKI MFG
409.90 SGD
ADD TO CART
Spring Load Value 0 to -100 Degrees (mN): 550 - 8050, Minimum Scale Value: 2 degree, Dimensions (Width W x Depth D x Height H) (mm): 56x27x113, Needle Shape: Diameter 10mm, Weight (g): 280, Measuring Range: 0 - 100 degree
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Other Measuring Instruments
Sharpening Stone, "King Combi"
King Stone
4.33(6)
10.80 SGD
ADD TO CART
Purpose: Sickle, knife, carving knife, grinding and finishing, Dimension (mm): 135x30x30, Grain Size: #250/#1000 (rough sharpening / semi-finishing), Specification: Double-sided type
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding
Oil Based Pensil, "DERMATOGRAPH"
Mitsubishi Pencil
5.00(5)
16.81 SGD
Purpose: Marking of various smooth surfaces such as metal, glass, leather, and plastic., Weight (g/pc): 10.75
Category Cutting Tool, Grinding Tool and Measurement Tool > Welding Supplies > Talc Pencil and Marker
Digital Force Gauge
SHIMPO
554.26 SGD
Pricision: +/-0.3R.C., Dimension (Length L x Width W x Thickness) (mm): 147x75x38, Accessories: -
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Dynamometer, Load Cell, Torque, Pressure and Flowmeter
Diamond Sharpener
H&H
3.00(1)
16.84 - 22.63 SGD
Width (mm): 15
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding
Welding Electrode
MonotaRO
17.82 - 45.90 SGD
Caution: During welding , If you inhale the generated gas or fumes, it may cause damage to your health . So please use exhaust , ventilation or wear protective equipments ., During welding , If you inhale the generated gas or fumes, it may cause damage to your health . So please use exhaust , ventilation or wear protective equipments ., Purpose: Welding of car, bridge, lightweight steel frame, and construction., Welding of car, bridge, lightweight steel frame, and construction., Standard: JISZ3211 D4303 equivalent product
Category Cutting Tool, Grinding Tool and Measurement Tool > Welding Supplies > Welding Rod
Digital Scale Mini
AS ONE
4.00(1)
96.28 - 119.90 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Plate Diameter (mm): 120, Power: 3 AA batteries x, or AC adapter (included), Dimension (mm): 205x145x45
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > AS ONE Products
Circle Cutter
TRUSCO
3.00(2)
52.90 SGD
ADD TO CART
Cutting Range (mm): 25 - 125, Dimension F (phi mm): 5.5, Dimension G(mm): Opposite side 7, Dimensions C (mm): 35, Dimensions B (mm): 11.5, Dimensions E (mm): 80, Dimensions D (mm): 37, Dimensions A (mm): 23, Shaft Diameter: Three groove 10mm, Weight (g): 191, Material: Body: S45C blade part: SKH-51 drill part: high-speed steel, Accessories: Iron for blade (TCC-125KA) x1 sheet, 3mm hex wrench
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Drill
Pressure Switch
Saginomiya Seisakusho
4.12(8)
84.36 - 89.52 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Dynamometer, Load Cell, Torque, Pressure and Flowmeter
Diamond Paste
MonotaRO
13.53 - 15.16 SGD
Oil Base or Water Base: water-based
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding
Digital Carbon Caliper
MonotaRO
20.98 - 22.62 SGD
Caution: Replace the batteries in case of no power or display flashes., Replace the batteries in case of no power or display flashes., Replace the batteries in case of no power or display flashes., Replace the batteries in case of no power or display flashes., Storage Humidity (%): 0-80, Storage Temperature (DegreeC): - 20-70, Repeat Pricision (mm): 0.1, Minimum Scale (mm): 0.1, Power: SR44 battery, Operating Temperature Range (deg C): 0-40, Accessories: Monitor battery
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Vernier Caliper, Micrometer and Dial Indicator
Soldering Station
Hakko
4.33(3)
239.90 SGD
Caution: Mouse cap sold separately., Power Cord: Three core rubber cord, Trowel Mass (g): (Cord) 46, Overall Length of Trowel Part (mm): (Cord) 217, Cord of Trowel Part (m): 1.2, Trowel Leakage Voltage: Less than 2mV, Trowel Part Consumption Power: 65W(26V), Station Output: 26V, Resistance between Iron Tip Ground(ohm): 2 or less, Station mass (kg): About 1.2 (cord), Station External Dimensions (mm): 100(W)x120(H)x120(D), Standard Iron Tip: T18-B, Plug: Two-pole grounding type plug, Power Consumption (W): 70, Power (V): AC100 50/60Hz
Category Cutting Tool, Grinding Tool and Measurement Tool > Solder Products and Electrostatic Discharge Articles > Soldering iron and Soldering related products
Point tap (for general use) (EX-POT)
OSG
8.50 - 889.90 SGD
Chamfer Lcf: 5P
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Tap, Dies
Sharpening Stone Board
GISUKE
3.00(8)
18.59 SGD
Purpose: Resharpening of the various cutting tools and knives. Rough sharpening for # 150: ideal for a significant revision of the blade when necessary. Mid sharpening for # 400: ideal for small nicks or sharpening in the edge adjustment. Mid sharpening for # 1000, Resharpening of the various cutting tools and knives. Rough sharpening for # 150: ideal for a significant revision of the blade when necessary. Mid sharpening for # 400: ideal for small nicks or sharpening in the edge adjustment. Mid sharpening for # 1000: perfect for everyday care and resharpening. Grinding / sharpening for #150/#800: Knicked blade, blade adjustment, and resharpening can be done with just this one.
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding
Carbon Fiber Digital Caliper
Shinwa Rules
31.00 - 33.60 SGD
Storage Temperature (DegreeC): -10 - 60, Repeat Pricision (mm): 0.1, Minimum Scale (mm): 0.1, Allowable Temperature (degreeC): 0 - 40, Power: Oxidized silver battery SR44 x 1, Accessories: Case
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Vernier Caliper, Micrometer and Dial Indicator
Thermometer Sensor, DP-350, Handy Type
RKC Instrument
4.00(2)
129.90 - 269.90 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Environmental Measuring Instruments and Temperature Humidity and Water Quality Etc./ Gas Measure
Pressure Gauge
Yamamoto Keiki
19.94 - 34.82 SGD
Purpose: For measuring air pressure, oil pressure, and other general pressure., For measuring air pressure, oil pressure, and other general pressure., Main Material: Brass, Pricision: +/-1.6%F.S.
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Dynamometer, Load Cell, Torque, Pressure and Flowmeter
Diamond Dressing Stone
Yamato Seitosho
5.00(2)
8.73 - 12.50 SGD
Dimension (Length L x Width W x Thickness) (mm): 100x20x20, 100x20x20
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Diamond Dresser
Hand-Held Refractometers
ATAGO
169.90 SGD
Purpose: Meets wide variety of industrial and food product needs - water soluble cutting oil, aqueous detergent liquid, various soluble liquids, fruit juice, refreshing soft drinks, carbonated drinks, soup, etc., Meets wide variety of industrial and food product needs - water soluble cutting oil, aqueous detergent liquid, various soluble liquids, fruit juice, refreshing soft drinks, carbonated drinks, soup, etc.
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Environmental Measuring Instruments and Temperature Humidity and Water Quality Etc./ Gas Measure
Taper Gauge, with Straight Ruler
Niigata Seiki
5.00(1)
20.72 SGD
ADD TO CART
Purpose: Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Overall Length x Thickness (mm) (Te - PA - GE - di): 148.5x1.2, Overall Length x Thickness (Scale) (mm): 155x0.5, Finishing: Hard chrome plating, Minimum Scale (mm): 0.1, Pricision (mm): +/-0.05, Measuring Range (mm): (Taper gauge) 1-15, (linear scale) 0-130 , Material: Hardened stainless steel, Type: Taper gauge
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Reference Instrument and Gauge
Digimatic Indicator
Mitutoyo
4.00(1)
219.90 - 339.90 SGD
Back Cover Specification: With lug, Battery Life (continuous use): 7000, Gauge Head (mm): SPHERICAL R=1.5 (CEMENTED), Functions: Zero set function (Absolute origin set) preset function Direction switching function Tolerance judgment function Error alarm Output function Display of the rotation function (330 degree), Outer Frame Diameter (mm): 59, Quantization Error: +/-1 count not being included, Display: 6-DIGIT LCD, UNSIGNED, Power: SR44 (BUTTON-TYPE, SILVER OXIDE BATTERIES) 1 PIECE, Series: 543, Measuring Range (mm): 12.7, Weight (g): 170, Description 2: Characters 11 mm high DECA character has been put on a display of ease of reading.
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Vernier Caliper, Micrometer and Dial Indicator
Waterproof sand paper
FUJI STAR (Sankyo-Rikagaku)
4.71(7)
67.99 - 119.90 SGD
Base Material: Cw, Cw, Abrasive Material: CC, CC
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding
Double-Sided Diamond Wheel
SK-11
5.00(6)
54.13 SGD
Caution: Please sharpen it with applying water, Please sharpen it with applying water, Purpose: Available to grind ceramic cutlery ,carbide metal, hard cutlery etc(knives, chisel, lane etc), Available to grind ceramic cutlery ,carbide metal, hard cutlery etc(knives, chisel, lane etc), Grinding Stone Size (mm): 204x65x7, 204x65x7
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding
Magnetic Stand
Mitutoyo
5.00(1)
119.90 SGD
ADD TO CART
Prop Size (mm): phi10x165, Main Pole Size (mm): phi 12 X 177, Magnet Dimension (Width x Depth x Height) (mm): 50x58x55, Mounting Hole Diameter (phi mm): phi6, phi8, Adsorption Ability (N): 600, TRUSCO Part Number: 273-6357
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Magnetic Tool
Ceramic cutter
Work Finisher
4.44(9)
36.71 SGD
Cutting Edge Angle (degree): R30, Material (body): Plastic, Materials (Blade): Ceramics, Blade Thickness (mm): 1.5
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Chamfering and Deburring
T-Slot Cutter
MonotaRO
3.17(6)
40.03 - 62.05 SGD
Purpose: For groove processing
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Cutting Off and Slot Processing
Digital Timer
dretec
4.67(6)
12.81 SGD
ADD TO CART
Alarm Sounding Time (sec): 30, Maximun Setup Time: 99 minituesute 99s alarm rings for about 30 minituesute, Dimensions (Height H x Width W x Depth D) (mm): 18x60x97, Weight (g): 63, Color: White, Material: ABS, Specification: Count up function. Repeat function.Slide type wall hook. Powerful magnet., Accessories: BATTERIES (SINGLE 4 SHAPE DRY CELL DC1.5V x 1PC)
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Other Measuring Instruments
Inspection Mirrors
OsakaSpirit
8.80 - 8.99 SGD
Material (mirror): Glass
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Optical Measuring Instrument, Loupe, Magnifying Glass, Microscope and Telescope
Grass Cutter
Takumi
54.90 SGD
ADD TO CART
Hole Diameter (mm): 25.4, Cord Length (m): 5, Weight (g): 370, Specification: TAKUMI diamond type code built-in Body ABS + metal
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Nylon Cord for Bush Cutter
Led Light Magnifier
MonotaRO
22.43 SGD
ADD TO CART
Caution: AAA battery not included, AAA battery not included, AAA battery not included, AAA battery not included, Material (lens): Glasses (optical lens), Batteries: AAA x 3 pieces (sold separately), Magnification: 10, Lens Diameter (phi mm): 30, Weight (g): 43, Dimension (mm): 106x39x26, Specification: With LED light, Accessories: W/pouch
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Optical Measuring Instrument, Loupe, Magnifying Glass, Microscope and Telescope
Pressure Gauge
Nagano Keiki
56.30 - 83.73 SGD
Materials (share): CA203, Outer Diameter (phi mm): 60, Case Shape: No A-type vertical spit
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Dynamometer, Load Cell, Torque, Pressure and Flowmeter
Pocket Microscope
CONTEC
3.67(3)
21.16 SGD
ADD TO CART
Purpose: It is an excellent magnifier useful for applications such as observation and examination., It is an excellent magnifier useful for applications such as observation and examination., Material (lens): Acrylic resin, Lighting System: LED light, Lighting Time: About 4 hours, External Dimensions (Width (W)x Depth (D)x Height (H)) (mm): The time of storage /32x22x84, Magnification: (Enlargement ratio) approximately 60 to 100, Power: Button cell SR41Wx3 piece (battery attachment for a test), Weight (g): About 25 (battery included), Material (Body): ABS resin, elastomer resin
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Optical Measuring Instrument, Loupe, Magnifying Glass, Microscope and Telescope
Digital Multi Meter
Sanwa Electric Instrument
4.75(4)
84.36 SGD
ADD TO CART
Condenser Capacity (F): 50N/500n/5 micro / 50 micro 100 micro / Highest accuracy 5% + 10 0.01 NF, Built-in Battery: R6P (double-A form) x2, Fuse: 0.5/250 V IR300A 6.3 x 30 mm dia., Safety Standards: IEC61010-1 CAT.[III]600V Max, Duty Ratio: 20% To 80 % Highest accuracy :0.5%+5, Diode Test: Open voltage about 1.5V , Electrical Connection Range (buzzer) (ohm): 10 to 80 open voltage: About 0.4V, Direct Current (A): m/400 40 m's Highest accuracy :2.8%+5 0.01 MA, Alternating Current (A): m/400 40 m's Highest accuracy :2.8%+5 0.01 MA, Sample Rate: Part number: about 2 / s, Frequency Characteristics: 40 - 400Hz, Character Height (mm): 17.5, Display: Numerical section: 4000, DC Voltage (V): 400 m/4/40/400/600 Highest accuracy :0.7%+3 Decomposition of function :0.1mV Input resistance: 10 M-100 M o...
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Electrical Measuring Device, Tester Etc.
Holder
Sanritsu Electric Industry
4.67(3)
24.24 SGD
ADD TO CART
Operating Rod Diameter (mm): 3.2 - 6.0, Welding Current (A): 300, Weight (g): 435, Length (mm): 235, Description 2: PLEASE USE 3 STANDING JIS PLANT IN WELDING ROD HOLDER.Because all metal, covered with an excellent heat insulant and qualified by examination of the withstand voltage test based on the JIS standard and variety of peace, can be used., Specification: Electric connection method (Screw stop)
Category Cutting Tool, Grinding Tool and Measurement Tool > Welding Supplies > Welding Cable and Connection Joint, etc
Sharpening Stone, "King Form Grinder"
King Stone
14.21 SGD
ADD TO CART
Purpose: For sharpening general Household knives, Dimension (mm): 176 x 52 x 15 (Wheel only), Grain Size: #1000
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding
Diamond Drill Bit
BOSCH
41.32 - 55.59 SGD
Effective Length (mm): 20, Overall Length (mm): 65, Compatible Models: Battery-powered drill battery-powered drill vibration (rotation mode)
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Drill
Magnifier
TRUSCO
7.31 SGD
ADD TO CART
Magnification: 3, Lens Diameter (phi mm): 38, Type: Magnifying glass, Weight (g): 27, Finishing Material: Lens: glass, Overall Length (mm): 92, TRUSCO Part Number: 250-9083
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > TRUSCO
Thickness Gauge
MonotaRO
8.47 - 48.89 SGD
Leaf Width (mm): 12.7
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Reference Instrument and Gauge
Soil pH Meter A
Shinwa Rules
3.75(4)
63.24 SGD
ADD TO CART
Caution: Not for measurement of liquid acidity., Not for measurement of liquid acidity., Purpose: Guide to managing soil acidity (pH) for gardening., Guide to managing soil acidity (pH) for gardening., Pricision (pH): +/-0.5, 1 Scale: pH0.2, Measuring Range (pH): 3 - 7, Main Part Dimension (mm): 106x47x47, Weight (g): 100, Material (Body): ABS resin, TRUSCO Part Number: 405-5870
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Environmental Measuring Instruments and Temperature Humidity and Water Quality Etc./ Gas Measure
Stand Magnifier, with LED Light
Clear Optical
5.00(1)
84.95 - 192.51 SGD
Type: LED light
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Optical Measuring Instrument, Loupe, Magnifying Glass, Microscope and Telescope
Pressure Gauge, Ф60
TOKO (Toyo Keiki Kogyo)
4.50(2)
21.41 - 42.11 SGD
Dimensions c(mm): 13, Dimensions b (mm): 32, Dimensions e (mm): 16, Connection Thread: 1/4G(PF), Dimensions D (mm): 58, Outer Diameter (phi mm): 60, Dimensions A (mm): 63
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Dynamometer, Load Cell, Torque, Pressure and Flowmeter
Feeler Gauge
TRUSCO
11.37 SGD
ADD TO CART
Pricision (mm): +/-0.01, Length (m): 1, Weight (g): 106, Finishing Material: SK tempering article., Thickness (mm): 0.3, Width (mm): 12.7, TRUSCO Part Number: 250-8206
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > TRUSCO

1 2 3 4 5 6 7 8 9 10 ...434 Next