Customer Reviews of Drill Stand
The reviews are automatic translation.
Showing 1 - 20 of 40 Reviews .
It is convenient to install near the drill board.
On 2017-05-04 14:17:17
It can store a wide variety of drills, is easy to use, and is eccentric in order.
Organizing of the drill bit
On 2016-09-29 17:33:48
It rotation was bad, but now turn to smooth and polish the junction in the paper.
Organization of iron and steel cut
On 2016-04-11 15:37:37
Because very easy to use, but he is only the number of holes are there, and more easy-to-use if Sasere by about at least two, I think.
Used to speed up the installation and removal of a drilling tool for a hobby "Sailboat Production"
On 2015-10-25 14:52:25
Firstly, the bottom part is rotatable and it is easy to check the tool inserted in the stand. Next, the position of the storage hole of each size has a moderate inclination and it is convenient for checking and detaching the cutting tool. Furthermore, the size of each storage hole is clearly stated and it is easy to manage the tool. Currently it is located in front of the workbench and it can be used at any time.
For organizing the tool box
On 2015-10-16 17:32:11
Since it is not metal, its use is good.
Organizing drill bits
On 2015-03-19 17:15:46
Although the price is satisfactory, the numbers written beside the bit insertion part are hard to see, black stands can not be seen with black numbers.
On 2014-10-31 13:45:43
The balance is bad and it is difficult to rotate.
Used for storing drills
On 2014-09-24 17:47:51
There is one drill stand, but I bought it for ordering because there are many drills that can not fit in. What I've noticed is that the hole is about 0.1 mm wide open. One upper drill will also be in one small hole. I think that it would be better to improve here.
On 2014-06-24 16:56:04
It would be equivalent to the price
Naturally drilling work to attach it to the drilling machine
On 2014-04-13 20:40:16
It is good that it is inexpensive and it becomes practical enough. The difficulty is that the hole is large and it goes into a small step in two steps.
On 2014-03-12 14:21:56
Although I was about to buy a domestic product, I tried purchasing it as a trial if the price was cheap, if publicity had appeared as "such a good product as well!" In the side of the side. A mark is attached. The axis of rotation must be solid and not rotated, but must be rotated with each base. Drill hole accuracy is not good. A 4.0 mm drill sticks to 3.8 mm hole even if it is 3.9 mm. In domestic products, it does not get stuck in the next hole first. I failed.
There are a lot of drills so to organize it
On 2014-02-26 13:32:14
Since it is a rotary type, it should turn easily but it does not turn around
On 2014-02-25 23:11:08
I bought it in September last year, the stand has gone off in about a month, I used it without a stand, but one hole to drill for a while, another one and bottom starts to drop out, It is no longer the case,
Keep a drill for each size
On 2013-12-16 16:12:53
When using it is very good at knowing the drill size at a glance, just because the color of the drill stand is black, it is hard to see the size a little, you can clearly understand the bright colors.
On 2013-05-05 10:27:23
About six months have passed since I started using it. It consists of a rotating base, a stand and two parts, but since the base is smaller than the stand, it has been toppled over and the drills are broken up more than once. Especially because the center of gravity goes up as you drill up. Rotation was not smooth in the first place, it was rotated every base and used. It is thought that the rotating function is useless unless it is screwed to the workbench. Currently, the base is split by pliers and used only in the stand part. Although it is written as DRILL STAND in English on the top, it is also written in Korean. I am a little worried. Accuracy of the hole as per the review of others.
Storage of drills
On 2013-03-07 19:10:41
Domestic products we used previously only have one hole because holes and drill diameters fit perfectly but this product is too usable unless you can not stab it unless the hole accuracy is too bad and you have to check the drill diameter.
Drill blade management
On 2012-11-19 17:26:54
The inner diameter of the designated position is larger than the drill diameter, resulting in poor accuracy.
On 2012-11-16 16:58:45
Rotation is not smooth It is difficult to remove because the body turns when taking out.
Organizing the drill size
On 2012-09-18 19:43:43
The size entered in the trimmer will be invisible due to scratches during use This size of the drill is bigger and the size preservation is bigger and even the presbyopia looks better and the working efficiency rises
On 2012-08-22 00:17:38
Because the drill size enters even in small size one size. I feel that the accuracy of the hole is not very good. I feel like inducing a drill biting a teeth stab.
Customers Who Viewed This Item Also Bought