The reviews are automatic translation.
Connection between ink tank and print head
On 2017-08-08 13:09:19
Because it is silicon, it will stretch well.
Even for a nipple which is somewhat impossible in thickness, it can be extended and used well.
Silicon hose is convenient because it saves different diameter nipple (haha)
On 2017-08-01 20:18:33
I use it for brake fluid exchange.
Since it became old, I replaced it.
The reason why you are using continues to be cheap is the best.
Ih range hood slip prevention
On 2017-07-30 16:03:37
I think that it is better if there is something with a cut in the tube
Waterproof tape light
On 2017-07-19 09:41:35
Although it is out of the range of use, I use it with the waterproofing of the LED tape light.
Even with non-waterproof LED tape light, let's run through this and both sides are made of silicon
If it blocks, it becomes waterproof specification, the material is slightly whitish and it is cloudy
You may spread more than transparent. Even though you split in half and glued with silicone
On 2017-07-17 12:35:29
I tried it normally. Because it was not in the nearby home center, it is saved
Maintenance of automobiles
On 2017-07-01 18:46:52
Purchased for drain application of brake fluid.
There is no particular problem in quality.
Brake fraud exchange
On 2017-06-19 20:31:11
Is there a feeling of stickiness around the tube a little?
There is nothing wrong with anything that I felt.
My own eyedropper cap
On 2017-06-19 07:36:47
I made a "cap" for my eyedropper about 7.5 - 8.0 mm in diameter.
It is regrettable that you can not paste the photos here.
> Posting URL of external site or contents to guide access to it
Because it seems useless, those who are interested please try goog with a word that seems to be related.
I uploaded photos to other sites, so it may be found.
Although it is a syringe which can be disposable, since I intend to use it a couple of times, I wanted a cap so that the syringe itself and the surroundings would not get dirty, but just good quality ready-made goods could not be found, I decided to create it.
The silicon tube was cut to an appropriate length,
ACE (Ace) tip protection cap
Insert it at the tip and complete.
On purpose, we used a cap with an inner diameter of 9 mm which is slightly thinner than the outer diameter of 10 mm in this tube in order to avoid slipping off easily with a little oil.
When assembling it, because it does not enter as it is,
Crush the tube side so as to fold it once and thin it, and insert it into the cap.
As it is, as the tube is distorted, use a toothpick or bamboo chick or the like to push the tube a bit more forcefully from the inside.
It will be completed if the tube spreads firmly and it closely contacts the inside of the cap.
The cap shrinks against the force to be expanded,
Since the force that spreads against the force to be crushed acts on the tube, it stops pretty firmly. The kind of adhesive is unnecessary, but worried persons may adhere / heat-bond.
In addition, in actual use, because the dropper is wet and slides with solvent etc.,
Even if there is little allowance for the tube inner diameter and eyedropper drum diameter, it can be mounted and dismounted smoothly.
Depending on the liquid handled by the eyedropper, there is a possibility that it will become detached if it gets tight in such a tight dimension, so please arrange the dimensions when copying.
Incorporation into own products
On 2017-06-07 17:21:29
The product arrived the next day after placing an order. Thank you very much. We have successfully installed it for air piping of our own products (marketed products).
Exchange of Wausch Liquid pipe deteriorated and it broke and replaced
On 2017-05-30 15:01:10
So soft and flexible it is easy to use and easy to finish the installation, the liquid also felt comfortable