The reviews are automatic translation.
Measure the depth of the grooves of the tire
On 2017-02-15 17:37:27
Memory is I want you to about 0.2 if you can at least 0.5mm Since 1mm unit.
It was used for the maintenance work of the tire
On 2016-10-31 12:07:18
Since the development of operators vehicle Yu - when to explain the remaining Miri number of tire, - The
Because it is to show a direct scale, it can be easily explained than show the display of the calipers. very convenient.
Remainder groove measurement
On 2016-06-13 21:47:22
But was using an ordinary calipers until now, it can not be measured in the wheel house, short of very easy-to-use is. Cheapness of if frequency of use price of once or twice a year I think the important kana. It is satisfaction.
Check the tire remaining
On 2016-05-21 21:46:08
It was purchased for the maintenance.
It is small in size and inexpensive, user-friendliness was not bad.
On 2016-04-11 15:39:09
In spite of the price we are firm. I think that easy-to-use.
At the time of the air check
On 2016-01-17 03:37:03
Cheap is good
Tire groove measurement
On 2016-01-16 07:47:36
Since it is very convenient to enter also the place narrow in a small slightly too thin it is not suitable for workers with a hand such as a bear. Note the loss easier to fumble.
Maintenance and restoration of cars and motorcycles
On 2015-12-13 19:27:04
I am using put together in the area of the no air gauge in the tool box.
Read out the package, measured with the package as a number of Zakkuri.
We are satisfied with how to use that.
On 2015-12-11 21:46:23
Memory'd be better of ordinary gauge notation
Measurement of residual groove of tire
On 2015-11-05 17:46:40
Is easy to use because the small among the tire house. Since the only measurement of less than a millimeter can not afford to as calipers, it is OK if the use of only as a guide.