The reviews are automatic translation.
On 2017-01-14 15:05:04
It is used for repairing the board on which the track has peeled off. Degreased (remove Yani / Solder) Paste with tweezers. Because it has good adhesion with baked cloth, it is also used for simple self-made substrate production. As a precaution, since it is also post-treated with insulating varnish, durability should be good.
Automotive maintenance, tuning
On 2016-11-17 21:10:32
Excellent cost performance, good inventory, rich assortment.
Experiment measurement jig of communication equipment
On 2016-11-16 10:40:02
It was used as a ground connection between the coaxial connector mounting board and the copper foil. It is satisfied with no problems with conductivity and adhesiveness.
Used as a jig
On 2016-09-29 16:32:10
Conductivity can also be used without problems.
As a masking tape in aqueous solution
On 2016-07-07 20:28:20
Although the strength of the tape was satisfactory, it was much weaker than the one expected to have adhesive power, so there were a lot of penetration and it was difficult to use in masking in aqueous solution. I expected it because of the continuity, but I decided it is impossible to use in this application.
Repair of key board film board
On 2016-01-16 20:30:36
The disconnection of the pattern of the keyboard film board was repaired with this conductive copper foil adhesive tape. The continuity of the pattern disconnection part has recovered. This tape has a length of 20 m, so it is convenient for use with a small amount as there are something a little short, as in the review of others.
Repair of seat type wiring
On 2015-07-20 22:24:21
Part of the printed sheet by the conductive paint was degraded by moisture or the like. Used to repair this part. Since there is continuity also in the adhesive part, cutting it according to the width of the line, restoring conduction just by pasting. It is quite convenient. A little more, if there is a small quantity (short) type, it is convenient and easy to use for carrying and etc.
Measures against noise of control cable
On 2014-03-14 16:17:39
I was looking for objects with a width of 25 mm. I think that it will repeat because COSPA is also good.
Children's toys film base disconnection repair
On 2013-10-14 16:39:53
I bought it to cover the disconnection of the film base of the toy from the top to purchase it for repair, but because the disconnection face of the base is small, it cuts thinly and pushes it considerably. I would like to raise the conductivity or adhesion of the adhesive a little more. I am very satisfied with the amount, but amount (length) does not need this much. It is enough if there is about 30 centimeters in length so it is nice to have around that product.
Electronic device shield, GND aid
On 2013-06-14 14:07:27
Compared with the one sold at electronic board shops, the unit price is cheap and it is profitable.